Fuvalve top entry ball valves

Top entry ball valves, also known as top-mounted ball valves, are widely used in existing and natural gas pipelines, as well as in equipment such as oil extraction, refining, petrochemical, chemical, chemical fiber, metallurgy, nuclear power, food and papermaking. The integrated valve body of the top-mounted ball valve reduces the leakage points of the valve, is convenient for online maintenance, advanced manufacturing technology, high pressure, and wide application range. The top-mounted ball valve specification below DN100 is a double-slope [...]

Fuvalve ceramic butterfly valve for high erosion nickel solution

Fuvalve ceramic butterfly valve for high erosion nickel solutionFuvalve offered 6″,8″,10″12″,14″ ceramic lined butterfly valves to a famous mining industry in Phillipine for acidic, high temp. and pressurize nickel slurry.Each size were used for seveal different applications with acidic and high erosion medium,the end user has test our product compare to the existing butterfly valve which they used to use and found the erosion-resistant property of Fuvalve ceramic lined butterfly valve are very excellent and quality are Satisfactory compare to other [...]

Abrasion-resistant valves

FUVALVE offers series of valve for abrasive,high-wear and erosion applications.The main product range of abrasion-resistant valves that Fuvalve offers are ceramic lined valve series and pinch valve series. 1.Fuvalve ceramic lined valve for abrasive applications,the material of valve body can be WCB,SS304,SS316,SS316L or other alloy steel fully lined advance ceramic,and the sealing face of valve ball,butterfly disc or gate disc lined ceramic. FUVALVE Structural Ceramic lined Valves(materials Al2O3 or ZrO2 Ceramic) Advantages of structural ceramic valves include hi-economy, long life (2~4 times of [...]

Ceramic ball valve for Flue Gas Desulfurization

Ceramic ball valve for Flue Gas Desulfurization(FGD valve)FGD is a process of treating flue gases with lime stone slurry to remove SOx, NOx and other pollutants and produce gypsum slurry as a by-product. One of the technological challenges in FGD system is the highly corrosion and abrasion of the slurry to the pipe lines and valves. Severe corrosion and abrasion can result in unacceptable high costs for replacement and maintenance. Therefore in many coal fired power plant by choosing [...]

Ceramic ball valves applied to Pulverized coal injection system

ceramic ball valve for pneumatic conveying Lithium powder (battery anode material) As a new energy Lithium battery which gets more and more attention. Production capacity increases very quickly. The anode Material of lithium battery is micron powder material. There is a tender that anode material will be tinier and tinier. It is easier to fly in the air because of tiny powder. Production environment is very severe and material recycle is very difficult while cost is high. Old original production method [...]

Ceramic ball valves applied to Pulverized coal injection system

Ceramic ball valves applied to Pulverized coal injection system Currently, in high furnace of metallurgy technique, techniques of high wind, high temperature, refined steel, injection oxygen enrichment have been widely used to save cost and increase production. Furnace injection techniques have been widely used for some places where lack of coke and small high furnace. Actually, for places where does not lack of coke, high furnace injection has not been adopted. Along with lacking of coke, cost increasing of coke meanwhile [...]

Ceramic ball valve apply to fly ash application

Ceramic ball valve apply to fly ash application As the fly ash handling system, high speed fly ash is extreme abrasive, and abrasion is the main problem for pipe valves and elbows. Generally soft seated and metal seated ball valves cannot last more than 3 months, frequent replacement and maintenance of the valves consumes too much manpower and cost, and also had a negative impact for the pneumatic conveying system.Ceramic ball valve apply to fly ash application FUVALVE has many and [...]

Fluorine Lined Gate Valve Introduction

Fluorine Lined Gate Valve IntroductionLined gate valve is one kind of valve which can be switched by disc, and the the movement of the disc direction are as perpendicular as to the flow direction. Gate valve is only used for fully open and close , cannot be used for adjusting or throttling. Regularly disc has two sealing face , and the model of two sealing face is formed to the wedge , and this wedge’s angle is varies from [...]

Electric fluorine lined ball valve working principle and suitable applications

Electric fluorine lined ball valve working principle and suitable applications This product lined with fluorine-plastic,equipped with new type structure of lever ball body and as well as the unique elastic lip-sealing seat has he hi-seat has he hi-sealed performance and lower torque of operation within the large pressure difference and temperature variation range. This product can be acted as switch or adjustment to carry the liquid as gas (including the vapor) in various industrial pipes with strong corrosion such as [...]

Fluorine lined butterfly valves use manual

Fluorine lined butterfly valves use manualLined valves and pipe fittings  are applied quickly in the oil, printer and dyeing, chemical industry along with the rapid development of modern industry. As the first choice of the  project has attracted great attention to engineering  design and working company , has a great potentiality in the market. Lined valve has the double function of switch and adjustment,  which can control the open-close fluently without effect the flow rate for ensure the continuity of flow [...]