Customized lengthen ceramic ball valve delivery to Russia for below applications:
Medium: gas with cat cracking catalyst
Stainless steel body, DN100 (4”) PN10-16 (Class150), wafer, ZrO2 ceramic lining
Working pressure of the medium 0.6 MPa
Design medium pressure 0.8 MPa
Ambient temperature: minus 40 – plus 60
Medium: air with catalyst
Average particle size – 60-100 microns
Catalyst again – aluminum oxide
Pneumatic actuator FC.
Air pressure 3-3.5 bar
Ceramic lined C-type ball valve delivered to France user for Gravity Discharge application as below： Fluid : Crushed wood + dry biomass 0-80 mm + small aluminum metal parts + pieces of glass Transport speed : 30 to 50 meter per second, pneumatic Pressure : 5 bar Temperature : ambiant No corrosive composition but pneumatic transport so very abrasive. Product Characteristics The C-type Ceramic Ball Valve with one or two-stage structure, single... read more
Ceramic C-Port ball valve and DN20 PN64 threaded ceramic ball valve delivered to Australia for applications of gas loaded with metal powder (aluminium, steel, etc.) and sometimes mixed with ceramic powder (alumina, etc.)FUV ceramic ball valve The FUV ceramic ball valve is designed for the working conditions of... read more
ceramic ball valve for pneumatic conveying Lithium powder (battery anode material) As a new energy Lithium battery which gets more and more attention. Production capacity increases very quickly. The anode Material of lithium battery is micron powder material. There is a tender that anode material will... read more
PN 25 Swing Type Ceramic Check Valves delivered to Morocco client for Media is hot liquid silicate with a lot of solid particle ,PN25 /temperature about 250°C.The material is so abrasif . Specification: Type Swing Type Ceramic Check ValvesSize DN50-DN300(1”-12”)Pressure Rating PN10,PN16,PN25,PN40, PN63, PN100, PN160, CL150, CL300, CL600, CL900Body Material WCB,... read more
Ceramic ball valve for Flue Gas Desulfurization(FGD valve)FGD is a process of treating flue gases with lime stone slurry to remove SOx, NOx and other pollutants and produce gypsum slurry as a by-product. One of the technological challenges in FGD system is the highly... read more
Steelmaking can also use ceramic valves Author—FUVALVE ENGINEER Steelmaking dedusting At present there are many kinds of dust removal process, the form of steelmaking dust removal system is also diverse, due to the form of different, dust removal system facilities and composition is not the same, but... read more
Ceramic ball valve ready to delivery After testing of Fuvalve’s product,the end user very satisfy with our quality and place an order of DN 65 ceramic ball valve for aluminum powder pneumatic conveying.Now 60 nos of ceramic ball valve are ready to delivery to the project... read more
Ceramic valves using in process of Iron pretreatment Author:FUVALVE ENGINEER TEAM Iron pretreatment Iron pretreatment refers to the molten iron in the steelmaking furnace before, in order to remove or extract some kind of composition and the treatment process, such as the molten iron furnace desulfurization, dephosphorization... read more
Hydraulic drive DN150 ceramic ball valve delivered to South America user Medium:Copper concentrate The temperature less than 100°C. Pressure 200 PSI Wear and corrosion resistance The valve ball and valve seat are all made of Hi-performance structural ceramics with hardness of HRA87 or above. So structural ceramic ball valves can... read more
In the first phase of transportation capacity of 3 million tons, equivalent to 4 billion gas, can 4.8 million tons of carbon dioxide a year, shandong and north China was the first to benefit; In addition, sinopec under construction and the preparation and four such... read more
