Threaded End Ceramic Ball valve

The ISO5211 Top connection for Actuator:

Valve Dimension Drawing:

The common valves are easily worn and have heavy-torque because of soft seal,3-pcs ceramic ball valve have overcome this weakness with the ceramic valve ball inside.If there is a need,small actuators can be used to reduce the cost.In addition,the valveis small and durable,and much maintenance cost unnecessary of the system can be saved.

Nominal Diameter:DN10-DN100

Nominal Pressure:1.0-6.4 MPa

Suitable Temperature:-20 to 280 Deg C

Suitable Medium:Water treatment,gas pipeline,steam boiler,lime slurry,food,sea water contains particles and etc.

Typical Applications:

In many corrosive or/and abrasive applications, PTFE or PFA lined ball valves and metal seated ball valves are used, but limited to the material, these PTFE or PFA lined ball valves and metal seated valves cannot last for a long time due to severe abrasion and corrosion. Ceramic ball valve have excellent performance and much longer life time than soft seated and metal seated ball valves in most corrosive and abrasive applications. Some typical applications listed below (but not limited to these applications) where FUVALVE Ceramic ball valve  have been widely used all over the world: Silicon Powder,Alumina Powder,Dry Coal Powder,Limestone Slurry,Gypsum Slurry,Plaster,Fly Ash,Mining Ore,Coal Powder Injection,Metallurgical dust,Thermal Power plant FGD,Petroleum Solid Catalyst,TiO2 suspension with sulfuric acid,Ammonia solution with powder,Hydrochloric Acid,Liquid Chlorine,Bulk Material.

Threaded end ceramic ball valve: