Ceramic C-Port ball valve and DN20 PN64 threaded ceramic ball valve delivered to Australia for applications of gas loaded with metal powder (aluminium, steel, etc.) and sometimes mixed with ceramic powder (alumina, etc.)

FUV ceramic ball valve

The FUV ceramic ball valve is designed for the working conditions of high-impurity,highviscosity,high hardness and large granular.The ceramic balls and seats inside are hard sealed so that the valves can be zero leakage,economical,practical.

Wear and corrosion resistance
The valve ball and valve seat are all made of Hi-performance structural ceramics with hardness of HRA87 or above. So structural ceramic ball valves can withstand the impact of Hi-speed liquids and hard grains, displaying excellent performance on wear resistance.

  • Long working life
    The static pressure test showed no leakage after 10000 times opening-closing.
  • Wide-range of applications
    Structural ceramic ball valves are applicable.Hard sealing ball valves can also be used in media with particles and fibers
  • Nominal Pressure:PN 1.0-6.8

    Strength Testing Pressure:2.4/3.8/6.0/9.6

    Low-pressure Gas Seal Testing Pressure:1.8/2.8/4.4/7.1

    Suitable Medium:Dust,Water,Oil,Gas,Slurry.

    Suitable Temperature:-40 to 280/500 Deg C

Share this post