Erosion resistance ceramic ball valve for pneumatic conveying Lithium powder
- وصف
- تحقيق
Erosion resistance ceramic ball valve for pneumatic conveying Lithium powder (battery anode material)
As a new energy Lithium battery which gets more and more attention. Production capacity increases very quickly. The anode Material of lithium battery is micron powder material. There is a tender that anode material will be tinier and tinier. It is easier to fly in the air because of tiny powder. Production environment is very severe and material recycle is very difficult while cost is high. Old original production method needs updating to suit modern current industry. Pneumatic conveying makes it possible to fulfill automatic production and unmanned workshop.
Advantages of pneumatic conveying of anode material for lithium battery production
1. Closed pipe transportation can achieve closed production
2. Dust is reduced, then production capacity increased
3. Reduce usage of workers. Currently, it is difficult to recruit workers every factory. Meanwhile, cost of workers increases every year, so it is a tender that machine will replace workers.
4. Reduce human factor and increase production efficiency.
5. Reduce human factor and raise production quality.
Ceramic ball valve for pneumatic conveying Lithium powder
For pipe line of anode material conveying, metal valves will be abraded easily and metal impurities will pollute medium. Based on this condition, fully lined ceramic ball valve made by FUVALVE is the best choice. All part that will be in touch with medium are lined with ceramics, so medium will not be in touch with metal parts. Because hardness of ceramic is super high which will not be eroded by medium so that medium will be not be polluted by metal impurities.
Below are the ceramic ball valves we supplied to a battery anode material manufactory in May of 2018,now is still working excellent.
Datasheet of Technical ceramics
Property | Units | Material | ||||
99.5% alumina | 99% alumina | 95% alumina | ZrO2 (Y-TZP) | ZrO2 (TTZ) | ||
Density | g/cm3 | ≥3.85 | ≥3.80 | ≥3.60 | ≥5.95 | ≥5.72 |
Water absorption | % | 0 | 0 | 0 | 0 | 0 |
Hardness | HV | 1700 | 1700 | 1500 | 1300 | 900 |
Flexural strength | الآلام والكروب الذهنية | ≥379 | ≥338 | ≥320 | ≥1200 | ≥1200 |
Compressive strength | الآلام والكروب الذهنية | ≥2240 | ≥2240 | ≥2000 | ≥1990 | 1750 |
Fracture toughness | Mpa m1/2 | 4-5 | 4-5 | 3-4 | 6.5-8 | 11 |
Max. service temperature | ºC | 1675 | 1600 | 1450 | 1000 | |
CTE | 1×10 -6 /ºC | 6.5~8.0 | 6.2~8.0 | 5.0~8.0 | 8.0~9.5 | 10.2 |
Thermal shock | T(ºC) | ≥250 | ≥200 | ≥220 | ≥300 | 350 |
Thermal conductivity(25ºC) | W/m.k | 30 | 29 | 24 | 3 | 3 |
Volume resistivity | ohm.cm | |||||
25ºC | >1 x 10 14 | >1 x 10 14 | >1 x 10 14 | >1 x 10 11 | >1 x 10 11 | |
300ºC | 1 x 10 12 | 8 x 10 11 | 10 12 -10 13 | 1 x 10 10 | 1 x 10 10 | |
500ºC | 5 x 10 10 | 2 x 10 9 | 1 x 10 9 | 1 x 10 6 | 1 x 10 6 | |
Insulation strength | KV/mm | 19 | 18 | 18 | 17 | 20 |
Dielectric constant(1Mhz) | (E) | 9.7 | 9.5 | 9.5 | 29 | 28 |
Erosion resistance ceramic ball valve for pneumatic conveying Lithium powder
منتجات ذات صله
صمامات الفراشة الخزفية نوع العروة
نهاية الخيوط صمام الكرة السيراميك
3 جهاز كمبيوتر شخصى اتصال نهاية الخيوط صمام الكرة السيراميك
ضغط الختم بونيه صمامات السيراميك الكرة الأرضية
صمام قرصي منزلق من السيراميك
محولات Y مبطنة بالسيراميك
صمام كروي سيراميكي مقاوم للتآكل لنقل المسحوق بالهواء المضغوط
أكواع أنابيب مبطنة بالسيراميك
صمام كروي من السيراميك ذو نهاية ملولبة
صمام كروي سيراميك 3 قطع مترابطة
القطر الاسمي:DN10-DN100
الضغط الاسمي:1.0-6.4 الآلام والكروب الذهنية
درجة حرارة مناسبة:-20 إلى 280 درجة مئوية
أنابيب سيراميك مبطنة للتطبيقات الكاشطة