Clapets anti-retour en céramique à battant
- La description
- Enquête
Clapets anti-retour en céramique à battant
spécification:
Taper | Ceramic Check Valves |
Taille | DN50-DN300(1"-12") |
Note de pression | PN10,PN16,PN25,PN40, PN25, PN25, PN160, CL150, CL300, PN25, CL900 |
Matériau du corps | WCB, CF8, CF8M, CF3M, Hastelloy, Monel, Alliage 20, Titane |
Matériel de garniture | Céramique ZrO2, Céramiques Al2O3, PN25, Si3N4 |
Terminer la connexion | Extrémité de bride, EN1092-1, DE 2501, ASME B16.5 |
Caractéristiques de conception:
Ceramics Seated, Swing type check valves
Flange Ends, Socket weld ends, screwed ends, butt weld ends
One piece body
Especially designed for extreme corrosive and abrasive slurry.
Écart de température
Depends on the material used for swing type ceramic check valves, the normal working temperature range is -29~250 degree.
Fiche technique des céramiques techniques
Propriété | Unités | Matériel | ||||
99.5% alumine | 99% alumine | 95% alumine | ZrO2 (Y-TZP) | ZrO2 (TTZ) | ||
Densité | g/cm3 | ≥3,85 | ≥3,80 | ≥3,60 | ≥5,95 | ≥5,72 |
Absorption de l'eau | % | 0 | 0 | 0 | 0 | 0 |
Dureté | HT | 1700 | 1700 | 1500 | 1300 | 900 |
Résistance à la flexion | MPa | ≥379 | ≥338 | ≥320 | ≥1200 | ≥1200 |
Résistance à la compression | MPa | ≥2240 | ≥2240 | ≥2000 | ≥1990 | 1750 |
Résistance à la rupture | Mpa m1/2 | 4-5 | 4-5 | 3-4 | 6.5-8 | 11 |
Max.. service température | ºC | 1675 | 1600 | 1450 | 1000 | |
CTE | 1×10 -6 /ºC | 6.5~8,0 | 6.2~8,0 | 5.0~8,0 | 8.0~9,5 | 10.2 |
Choc thermique | T(ºC) | ≥250 | ≥200 | ≥220 | ≥300 | 350 |
Conductivité thermique(25ºC) | W/m.k | 30 | 29 | 24 | 3 | 3 |
Résistivité volumique | ohm.cm | |||||
25ºC | >1 X 10 14 | >1 X 10 14 | >1 X 10 14 | >1 X 10 11 | >1 X 10 11 | |
300ºC | 1 X 10 12 | 8 X 10 11 | 10 12 -10 13 | 1 X 10 10 | 1 X 10 10 | |
500ºC | 5 X 10 10 | 2 X 10 9 | 1 X 10 9 | 1 X 10 6 | 1 X 10 6 | |
Force d'isolation | KV/mm | 19 | 18 | 18 | 17 | 20 |
Constante diélectrique(1MHz) | (E) | 9.7 | 9.5 | 9.5 | 29 | 28 |