Rückschlagventile aus Keramik
- Beschreibung
- Anfrage
Rückschlagventile aus Keramik
Spezifikation:
Art | Keramische Rückschlagventile |
Größe | DN50-DN300(1"-12") |
Druckrate | PN10, PN16, PN25, PN40, PN63, PN100, Mit Keramik ausgekleidete Ellbogen, CL150, CL300, CL600, Mit Keramik ausgekleidete Ellbogen |
Körpermaterial | WCB, CF8, CF8M, CF3M, Hastelloy, Monel, Legierung 20, Titan |
Material beschneiden | ZrO2 Keramik, Al2O3-Keramik, Wolframkarbid, Si3N4 |
Verbindung beenden | Flanschende, EN1092-1, VON 2501, ASME B16.5 |
Design-Merkmale:
Ceramics Seated, Swing type check valves
Flanschenden, Socket weld ends, screwed ends, butt weld ends
One piece body
Especially designed for extreme corrosive and abrasive slurry.
Temperaturbereich
Depends on the material used for swing type ceramic check valves, the normal working temperature range is -29~250 degree.
Datenblatt Technische Keramik
Eigentum | Einheiten | Material | ||||
99.5% Aluminiumoxid | 99% Aluminiumoxid | 95% Aluminiumoxid | ZrO2 (Y-TZP) | ZrO2 (TTZ) | ||
Dichte | g/cm3 | ≥3,85 | ≥3,80 | ≥3,60 | ≥5,95 | ≥5,72 |
Wasseraufnahme | % | 0 | 0 | 0 | 0 | 0 |
Härte | HV | 1700 | 1700 | 1500 | 1300 | 900 |
Biegefestigkeit | Mpa | ≥379 | ≥338 | ≥320 | ≥1200 | ≥1200 |
Druckfestigkeit | Mpa | ≥2240 | ≥2240 | ≥2000 | ≥1990 | 1750 |
Bruchzähigkeit | Mpa m1/2 | 4-5 | 4-5 | 3-4 | 6.5-8 | 11 |
Max. Service Temperatur | °C | 1675 | 1600 | 1450 | 1000 | |
CTE | 1×10 -6 /°C | 6.5~8,0 | 6.2~8,0 | 5.0~8,0 | 8.0~9,5 | 10.2 |
Thermoschock | T(°C) | ≥250 | ≥200 | ≥220 | ≥300 | 350 |
Wärmeleitfähigkeit(25°C) | W/m.k | 30 | 29 | 24 | 3 | 3 |
Volumenwiderstand | Ohm.cm | |||||
25°C | >1 X 10 14 | >1 X 10 14 | >1 X 10 14 | >1 X 10 11 | >1 X 10 11 | |
300°C | 1 X 10 12 | 8 X 10 11 | 10 12 -10 13 | 1 X 10 10 | 1 X 10 10 | |
500°C | 5 X 10 10 | 2 X 10 9 | 1 X 10 9 | 1 X 10 6 | 1 X 10 6 | |
Isolationsstärke | KV/mm | 19 | 18 | 18 | 17 | 20 |
Dielektrizitätskonstante(1Mhz) | (E) | 9.7 | 9.5 | 9.5 | 29 | 28 |