Ceramic Wedge Gate Valves

تخصيص:

تطبيقات نموذجية:

For some very hard particles or serious erosive mediums, general metal seated wedge gate valves will be washed out and damaged easily due to the abrasion and or corrosion. As a professional and experienced ceramic valve manufacturer, FUVALVE developes ceramic wedge gate valves to solve the corrosion and abrasion problems for wedge gate valves.
FUVALVE’s ceramic wedge gate valves are very suitable for those mediums contain fibers and hard solid particles, such as below listed typical applications:
Mining slag
Coal washing
Ash Slurry
Suspension
Oil with particles
Catalyst

ميزات التصميم:

نوع المنتج

1. The valves have two main structures: bolted (BB) bonnet type for low pressure ratings and pressure seal bonnet (PSB) for higher pressure.

2. Inlet seat and outlet seat are ceramics materials. By using the high hardness and high strength of high pure 99% Al2O3 ceramics, FUVALVE ceramic wedge gate valves have much longer service life than general metal seated wedge gate valves in similar conditions.

3. Two ceramic sealing rings are inserted to both sides of wedge gate. Besides the inlet and outlet seats are also ceramics, this ceramics-to-ceramics design can avoid abrasion and corrosion, which makes ceramic wedge gate valves have much longer service life than general metal seated wedge gate valves.

4. The actuation of FUVALVE ceramic wedge gate valves can be hand wheel, electric motor and hydraulic actuator, special requirements are available on customer’s require.

Temperature range
-29℃~550℃

Valve tightness
Leakage rate of Foyo ceramic wedge gate valves is as per API 600

Design Standards for Ceramic Wedge Gate Valves:
Steel Gate Valves, API 600/API 6D/API 602
Steel Gate Valves, ISO 10434, ISO 14313
Steel Valves, ASME B16.34
Face-to-Face dimension, ASME B16.10.009
End Flanges, ASME B16.5
Butt Welding ends, ASME B16.25.0000
Socket welding ends, ASME B16.11
Inspection and testing, API 598/API 6D

Design Description for Ceramic Wedge Gate Valves:
Full port design
OS&Y/non-rising stem
BB-Bolted bonnet and PSB-Pressure Seal Bonnet
Flexible Wedge, Fully Guided
Renewable seat rings
Forged T-head stem
Flanged or butt welding ends
Available with Bevel gear box